Good morning,
is there a possibility to scroll up and down my screen when i'm using a wavelink 5250 emulation ?
I can't use any combination of keys or the up/down specific keys.
Can someone help me please?
Thanks.
Roberto
↧
Is there a way to emulate page up and page down for motorola MC3190 ?
↧
why doesent SSH connection close on disconnect
Im running Velocity 2.0.2 and connecting to a Unix Server with ssh. The program does auto-login fine, however when I log off the server I get a blank screen until I hit a key. At that point I get an error - "Connection Lost" -Cannot access a disposed object. Object name 'ShellStream'
I have to hit OK and it takes me back to the start up screen where my host profiles are shown. The only way I can exit the program is to actually exit out of the app the Android way. I want the program to simply close once I log off. Is that possible?
↧
↧
The taskbar is not visible in TelnetCE, even though I'm not hiding anything in the options tab. How can I get it back, so I cen get into the config menus
I'm using TelnetCE 7.3 with app center. When I go into TelnetCE, I lose the taskbar which contained the config menus.
So I can't change config or even exit the program. I'm force to cold boot to exit TelnetCE. I'm do not have any
options in the 'options' tab checked, so nothing should be hidden. How can I get it back?
↧
01441798
Dear All,
We have requested some charter issue for the solution couple of month back. please check the previews mail about our conversation in this the case number 01441798. As per the test result the OMNII XT 15 interstitial browser perfectly fine with WAP G4 device that (.) dot characters working fine with universal license but the challenge is we are facing another issue when we type one character that is coming three time for and example:- if we typed character "a" that is appearing "aaa". please advise the permanent solution. thank you.
↧
find license for device back from repair
customer has 2 devices but cannot find the licence keys. how can we find them?
- 1.16031523020292 mac address: 4083DE9D6BF8
- 2.17047523022043 mac address: 4083DECA0AC2
here are the serial#'s and mac addresses of the devices
↧
↧
Motorola MC9090G, CE5.0 OS: 1.35.0000 Persistance TE Configuration
Hello,
I have a clientwhohas 35unitsMC9090Gterminalandneeds to establisha quick waytosetall terminals,but without usingprograms installed onPC.Itry to make acopy-paste.
This OS version incorporates V7.0.12 of TE. My intention is to set the Config of Telnet in 1 terminal (hosts, config.emulation, etc. ..), and extract the necessary files, then copy them to the other terminals.
Believedto have foundthe5 filesresponsible forthe configuration of theTE (Config.tim , HostCfgs.bin , HostDffs.bin , S24cfg.bin and Termcfg.bin),but I thinkI'm missing something, but randomly, when I make a Cold Start in the terminal, the Host I disappear. I can not find what are all the files and / or folders to be able to do what I intend. My goal is to configure 1 terminal and extract the need to copy to the other terminals, and configuration persists even doing a Cold Start.
Couldanyone help mesolve this problem
Thank you very much
↧
F3 key create Ò in VT100 terminal emulation on MC9090G
Post converted to PDF and attached for Migration.
↧
What's the difference between the two purchasable options?
The two options are Terminal Emulation 2 in 1 TN Client vs Terminal Emulation 4 in 1 Client. I'm trying to purchase Wavelink for the MC9500 series.
↧
Arrow keys acting like the tab key
On a screen with entry fields in a vertical list, when I use the up and down arrow keys they act like the tab key. The down arrow will move to the end of the field on the first press, the start of the next field with the second press, the end of that field with the third press, etc. Up arrow does the same thing. Left and right arrows work as expected. What setting am I missing that would change this behavior? This is on a new device, a Honeywell Thor VM3 with Windows 7 Pro. Telnet version 7.3.251 running 5250 emulation connecting to an IBM iSeries. Thanks!
↧
↧
Symbol MC9090 download version for telnetce (wavelink)
What manufacturer should I choose for download? Neither Motorola or Symbol is listed.
↧
TelnetCE/Data Wedge does not decode GS1-128 symbology. Symbol MC92N0 (Android Kit Kat)
I am having an issue where while using the TelnetCE application on MC92N0 devices running android it fails to decode GS1 barcodes. The scan settings for TelnetCE are manipulated in the Datawedge settings on the device and I have enabled GS1 symbology in the correct location. However when I attempt to scan the GS1 barcode it does not decode it. If I run DWdemo app on the device and scan the GS1 barcode it decodes correctly. So the issue seems to be isolated to TelnetCE.
↧
How to get rid of the status/title bar on MC9190 WM 6.5
I have a MC9190 with Windows Mobile 6.5 and I am running TelnetCE version 7.0.161. While I have Telnet configured to run full screen the title bar\status bar is still visible. The visible real estate is no so much the worry, but I want to control what the user has access to. By click on the icons on the status bar the user can still gain access to Windows, which I would prefer to prevent. I understand that I could use the Avalanche Enabler, but I do not really like that option as we do not use that. Are there any other options, like a registry edit that I can try to hide or disable this.
Thanks.
↧
Different Key Macros per session
We are under Wavelink Telnet on Windows CE
We have two sessions, one is VT220 and the other is 5250
since pressing F5 transmit nothing by default under a VT session, whe've added a Key Macro to generate Esc[15~ (mandatory in my customer's application)
the problem is when we switch to the 5250 session and press F5 : the same key macro is generated instead of the expected 5250 F5
Is there a possibility to specify in a key macro which session is concerned to avoid this problem ?
Thanks
↧
↧
Enter Key and field exit for As400 emulator
Hi all
i need to use DATALOGIC FALCON X3 connected to an As400 via 5250 emulator .. i don't understand how to configure keyboard key (not virtual keyboard) so that i can emulate "ENTER" and "Exit fields" keys tipical for As400
Thanks in advance
↧
How I replace GS (Group Separator) from GS1-128 by "]" character ?
I need to replace a <GS> (group separator) when I scan a GS1-128 barcode by a "]" character. How can I do that using terminal config from Wavelink Industrial Browser?
↧
Wavelink TelnetCE v7.3 on Moto MC9200 series mobile computer "wllog.log" error
I recently installed Wavelink TelnetCE v7.3 on Moto MC9200 series mobile computer. When I copy and paste the telnetCE.exe file to the Windows\startup folder and then reboot I get an error "There is no application associated with wllog.log, Run the app first then open this file from within the application." The application does come up fine but my clients would have to close this dialog box each time the device is booted up. If I don't copy the TelnetCE.exe to the start folder and just launch it, no error. any thoughts?
↧
Adding extra digit when scanning code 39
Hello,
We have TC70’s that add digits to code 39 barcodes, using Terminal Emulation.
The fix I have found for this is. When I go into Datawedge - Profile0 - Decoder Params – Code 39 – Verify Check Digit I check this box, go back into TE and the barcode scans fine without adding the extra digit.
When I restart the scanner and go back to Datawedge the Verify Check Digit box is unchecked when scanning a code 39 barcode again it adds the extra digit again.
I have been told this is not a data wedge issue and is TE related.
The only thing that I can see that would help or add a digit in TE would be the Scanner settings but we don’t make any settings changes in the group.
Running TC70 scanner with Android 4.4.3, TE version 2.0.18.4977, Datawedge Version 4.0.5
↧
↧
why doesent SSH connection close on disconnect
Im running Velocity 2.0.2 and connecting to a Unix Server with ssh. The program does auto-login fine, however when I log off the server I get a blank screen until I hit a key. At that point I get an error - "Connection Lost" -Cannot access a disposed object. Object name 'ShellStream'
I have to hit OK and it takes me back to the start up screen where my host profiles are shown. The only way I can exit the program is to actually exit out of the app the Android way. I want the program to simply close once I log off. Is that possible?
↧
How view emulation keyboard fullfunc keyboar at start?
hi!
How view emulation keyboard fullfunc keyboar at start? pleasee! or how i can resize the aplication area?
Thanks a lot!
↧
Esc key not functioning in terminal session
Hello,
We recently received several new devices with Windows Mobile 6. With these new devices I am unable to get the Esc key to register when in an active Terminal session. I brought up the keyboard test, and no value is returned when I press the Esc key. Regular letter and number keys are returning the proper codes. If I press the Esc key on the emulation keyboard the proper value does show up.
I have gone over and over the configuration settings without success. I've compared the working device settings to our new device settings and can't find any differences. It seems like I must be missing something simple. Any assistance is much appreciated.
Device: Motorola VC6090
Wavelink TelnetCE version: 7.3.79
↧