I am trying to find a way to change the color of the telnet window title bar. I want to have 5 distinct colors to designate which area a MC9090 unit belongs.
I can change the color of the background but the session text becomes difficult to read with some colors. I can change the color of the cursor but I would like it to stand out a little more.
We are using 7.0.1.33 telnet client on MC9090 and MC9190 units
Hi,
we cannot get the F12 key to work using 5250 emulation with ZEBRA MC92N0 CE7.O. When we try to get F12 to work we get an @ symbol, so we added the key macro 0040:\E055 to swap for the F12 key.
Now when we try the @ symbol does not appear but F12 does not function either?
Any help would be much appreciated.
If I have configured TE with two or more Host Profiles and I have active connections to two or more Telnet/SSH sessions is there any way to toggle between the open sessions besides using the drop down file menu? We are trying to avoid giving users access to the menu system at all.
Ideally I would want to use a keypress to toggle between my active sessions. I thought that this might be possible using scripting with the Run_Application command but it seems a bit convoluted.
My theory was to have the following logic (understand this is pseudocode):
Script Session1Toggle
Activate on (Keypress XYZ)
Run_application (TelnetCE.exe --host "HostProfile2name")
Script Session2Toggle
Activate on (Keypress XYZ)
Run_application (TelnetCE.exe --host "HostProfile1name")
Would this work as a toggle between active sessions or would it launch completely new instances of TE with each call?
Are there any other available methods?
how do i set a ring scanner up on WT41N0 to tab after scan?
Hello,
I`m trying to configure the switch/toggle between sessions keys red/green points but it doesn`t work. I have foud a solution at your page about macros for 9190 but unfortunatelly it doesn`t work. This is Windows CE 7.0 MC9200.
Thank you
Hello,
I am trying to set the answer back onto Wavelink Terminal emulation CE , but without success.
The name of the unit is talking to a VT200 WMS server and needs the name to identify it to the system.
I am setting DESMTM030 . But cant work out the format to set in the product Configuration tool.. Setting in Emulation Paramaters > emulation > VT & HP > common > VT new answer back.
Thanks for your help.
Hi all
i need to use DATALOGIC FALCON X3 connected to an As400 via 5250 emulator .. i don't understand how to configure keyboard key (not virtual keyboard) so that i can emulate "ENTER" and "Exit fields" keys tipical for As400
Thanks in advance
One of our customers has as problem with the default functionality on a Datalogic Skorpio X3. The problem is shown on input fields. First, they type in a long string (in this example "9" is typed in several times). After that, they go back and and type several times "5", so they and up with "55559999" and with the cursor behind the last "5". After that, they want to press Enter and only have "5555" as the input result. But this won't work, because "55559999" is send as the result. According to the customer, this kind of functionality was possible on their old Datalogic Memor devices running the discontinued DL-TCL-NET software. So the question is how to get the same kind of functionality or workaround the problem.
Hi,
I'm trying to remap F1 to [ALT][F1] with the Wavelink TE Android's version for a Panasonic FZ-A1, as far as I know F1 stands for 3B00 , but I don't know wich scape secunce stands for [ALT] key, and hoy to concatenate it with the [F1].
¿Does any of you has an idea about how to solve it?
Thanks in advace,
Hi i'm having difficulties using function keys with Motorola WT41N0 Telnet CE 7.3.192 and VT200 emulation. Random charachtes or error message key not recognized is diplayed if i'm trying to use Function keys (F1; F2 etc.) Any ideas?
Good morning,
is there a possibility to scroll up and down my screen when i'm using a wavelink 5250 emulation ?
I can't use any combination of keys or the up/down specific keys.
Can someone help me please?
Thanks.
Roberto
I need to replace a <GS> (group separator) when I scan a GS1-128 barcode by a "]" character. How can I do that using terminal config from Wavelink Industrial Browser?
Hello,
Our warehouse logistics are handled through an internal ERP application ensuring a proper flow of the reception and distribution of auto parts.
For this purpose we use around 110 mobile terminals with barcode scanners (RF Guns) of which 50 are deployed in the central warehouse.
The models used are:
Motorola MC2100
Datalogic Falcon X3
Datalogic Skorpio
In the central warehouse we are currently using 50 Motorola MC2100 scanners with Windows CE 6.0 operating system. As an emulator we are using Wavelink Corporation’s Telnet version 7.3.63 for Motorola MC2100 terminals.
Lately, the following problem began to manifest itself:
On a daily basis every Motorola MC2100 device suffers one or more unexplainable telnet session blocks.
When this happens, the terminal cannot interact with the application any more, the keyboard stops working and after a few minutes the display shows the "disconnected session" message. The terminal’s log doesn’t record any loss of connection to the access point.
The Access Points are all newly acquired from Motorola in order to ensure maximum compatibility between them and the mobile terminals.
Our question is:
To what extent the Telnet emulator may influence these session blocks, taking into account the following:
1. Telnet version
2. Certain parameters of the telnet configuration
3. “Avalanche Enable” configuration – we are using the Avalanche platform version 5.3.0.572 to manage our terminals
4. Having a large number of sessions (high load) on an Access Point.
Can you please help us with any idea in tackling this problem? Is there a log monitoring tool that can help us to identify the cause of these problems?
The situation is very critical and this seriously influences the process of delivery and reception of goods.
Thank you,
Florian Baloi
I need your help on how I can change the license platform version from IBMHost to VT. Thank you
Problem with Autologin feature which will stop and wait for user to press ENTER instead of executing command automatically.
Setup:
Wavelink TelnetCE - Host Profile - Autologin:
Name Prompt: "login:"
Name: "myuser1"
Password Prompt: "password:"
Password: "mypwd" (displayed as "*****"
Command Prompt: "domain:"
Command: "mydomain.com"
Result of connection test:
Autlogin correctly sets and executes login and password but for domain prompt only presets value "mydomain.com" and does not execute it (waits for user to press ENTER).
Expected result:
Return/ENTER is sent to host to execute the command.
Remarks:
The same problem occurs also for standard command (e.g. D:\MyApp\start.bat) when domain prompt is removed in the server setup.
Enviro:
Host: Windows Server 2008 R2 64bit, Georgia Softworks Telnet Server 8.05
Client: Motorola MC9190G, Windows Mobile 6.5, Wavelink TelnetCE 7.3.237 (latest available)
Thank you,
Michal
Hi community
I've trying to access a web application (SAP ITS Mobile) using the Web emulation through TelnetCE and with HTTPS protocol.
The problem is that when I try to reach the application, industrial browser request me a certificate to enter to the URL, even this is not required by the application, but the strange is that if I try to access the same app using the IE browser of the device, the system request the same data and selecting the certificate listed (also listed when using TelnetCE), the initial login page is displayed and after the login, everything works fine. But when I try to use TelnetCE to access the same application, the system show me the same certificate that is listed in IE, but when selecting this one I receive a error saying that "Client authentication certificate needed", could you know how to solve that, have you ever seen this problem when accessing HTTPS web applications?
Thanks and best regards,
Rodrigo Souza
SAP SD Specialist
Roche BR
Hi,
I'm trying to remap F1 to [ALT][F1] with the Wavelink TE Android's version for a Panasonic FZ-A1, as far as I know F1 stands for 3B00 , but I don't know wich scape secunce stands for [ALT] key, and hoy to concatenate it with the [F1].
¿Does any of you has an idea about how to solve it?
Thanks in advace,
Hi ,
do you know what vesion of Wavelink Telnet is OK for Intermec CN51 devices ? ( WM6.5).
thank you !
regards
I am using Wavelink Product Configurator ce-release 5.11-43
@
I am using 'Config Only'. and the program runs when I click on 'config Only'. However the configuration file is not copied to the scanner.
One of our customers has as problem with the default functionality on a Datalogic Skorpio X3. The problem is shown on input fields. First, they type in a long string (in this example "9" is typed in several times). After that, they go back and and type several times "5", so they and up with "55559999" and with the cursor behind the last "5". After that, they want to press Enter and only have "5555" as the input result. But this won't work, because "55559999" is send as the result. According to the customer, this kind of functionality was possible on their old Datalogic Memor devices running the discontinued DL-TCL-NET software. So the question is how to get the same kind of functionality or workaround the problem.